Display results as :

Rechercher Advanced Search

Who is online?
In total there is 1 user online :: 0 Registered, 0 Hidden and 1 Guest


[ View the whole list ]

Most users ever online was 31 on Wed Dec 18, 2013 11:44 pm
Latest topics

Mild engine rebuild tool list.

View previous topic View next topic Go down

Mild engine rebuild tool list.

Post by Onefast2gdsm on Mon Aug 06, 2012 9:03 pm

To do a rebuild your going to need:

Engine crane
Engine stand
Jack stands
Ring compressor
1/4 ratchet(s)
3/8 ratchet(s)
1/2 ratchet(s)
ACCURATE torque wrench
8, 10, 12, 14, 17, 19, 22, and 24mm wrenches.
8, 10, 12, 14, 17, 19, 22, 24, 32mm sockets on 1/4, 3/8 and 1/2 drives.
honing wheel if you're doing honing
shop manual, I prefer OEM factory service manual
Brakleen and lots of it
Brushes for cleaning
Paint if necessary
razor blades
silicone and lots of it
Pressure washer to degrease parts
Vaseline for priming oil pump
Oil for bleeding lifters/ coating block while your not working on it so it doesn't rust
face shield
Die grinder
Straight edge
scotch brite pads
Screw drivers
Allen sockets if using headstuds
Prybars for torquing flywheel (trust me you'll need it)
hammer for dowel pins

Male Posts : 112
Reputation : 1
Join date : 2012-08-06
Age : 27
Location : Newport, PA

View user profile

Back to top Go down

View previous topic View next topic Back to top

- Similar topics

Permissions in this forum:
You cannot reply to topics in this forum